The item shown in the photo is the delivery content.

■Prototype

This Nippon Sharyo C-tank machine was used on regional railroads and private lines in various regions. It looks good no matter what it is towing, such as passenger wagons, so it can be enjoyed in various scenes. Designed based on the Nansatsu No. 4, 35 ton machine.

■Features

The motor is powered by a 12V coreless motor. Low-speed gear reduction enables realistic running from very low speeds (39mm/s-6V*). Please note that this model is designed to enjoy the speed of the actual car, so it will not run at high speeds like general N-gauge models.

This part number is also a kit type of power unit. Main undercarriage (painted), wheels, crosshead and main rod are already assembled. The motor holder (M1.4) and the wheel center (M1.0) are threaded, the wheel center is painted, the flat gear, worm, motor, and wheel center are glued, and the rest of the parts can be assembled by screwing. Compared to old metal-frame machines, there are no parts that need to be carefully adjusted vertically and horizontally, and since it is equipped with a powerful motor, it should be much easier to assemble, although there are some tricks to it.

The prototype passed the R103, but since it is a C-type machine, we recommend running it on a curve with a little room to spare.

The car body is made of plastic by the latest photo-molding UV 3D printing method, and the railings and piping are all one piece, so no assembly is required.

The car body is one-piece, so there will be diagonal stripes on the sides of the car body. Please prepare the surface with paper, etc. as you like. Paint can be applied with surfacers and plastic paints as with plastic models.

*mm/s-6V - Millimeter per second at 6V load, calculated from the motor speed with no load.

Contents

Power unit parts set

Integrated car body, simple cab equipment, etc.

Screw couplers, screws, etc.

Assembly instructions

Please refer to the URL on the product label on the outer box (easy access by scanning the QR code with a smartphone camera).

Tools required for assembly

Drill φ1.0, φ0.8

Tap M1.0, M1.4

Adhesives: Power ---> anaerobic adhesive, Super X, SU, epoxy, etc. of your choice, Upper parts ---> instant adhesive, rubber adhesive, etc. of your choice

Plastic craft tools such as files, etc.

If you have any question or concern, please do not hesitate to contact me.
Thank you for visiting.