Key Feature
Alloy housing
Stable operation
Lightweight and durable
Low gas consumption
Eccentric design
Alloy rotor
Widely Application

Specification
Name: Pneumatic eccentric grinder
Chassis size: 5 "(125mm)/6" (150mm)
No-load speed: 13500rpm
Threaded interface: 1/4
Deflection diameter: 5mm
Air pressure: 0.63MPa
Gas consumption: 0.3m ³/ min
Exhaust mode: rear exhaust
Color: red black random
Product weight: 1.08kg (5 ")/1.11kg (6")
Package size: 192x145x115mm/7.6x5.7x4.5inch

Package Included:
1 x Pneumatic eccentric grinder
1 x Wrench
The variety of chassis on above pictures are demo tools ,not included in the package. thank you.

The color of machine is random,red or black.shows as above pictures

Operation Note:
1. The precision height of the machine, fine sand and iron chips entering the core may cause the impeller to break, so make sure that the air inlet is clean and do not let the sand enter the air pipe.

2. Always use oil-water separator and drain regularly to ensure the core is dry

3. Be sure to add 2-3 drops of lubricating oil into the gun body and idle for half a minute before use every day