Cutout for truss rod adjustment between the neck pickup and heel, open wiring channel from neck pickup to control rout and router hump on the treble side of the neck pocket
Body has been routed and shaped but has not received the final sanding
Typical weight is approximately 4 lbs 10 oz
Routed for traditional 2 Tele single coil routes, control cavity, jack socket and 6 bridge through-body-string holes
Pre-drilled for 4 neck mounting screws
2 3/16″ (56mm) neck pocket. Thickness: 48 mm
Drilled for vintage spec bridge and 3/8" (9.5mm) flush fit ferrules. Ferrules can be purchased HERE